Engine and Gearbox

Complete with spring and balls.

Numbers 16(TM), 21(MP) and 10(Ape50) in the parts drawing.

3 holes connection, inside diameter 19 mm, length 115 mm.

3 hole connection, inner diameter 19 mm, length approximately 144 mm. For the larger cylinder set...

Fill quantity: Piaggio Ape 50: 0.75 liter gearbox, 0.55 liter differential Piaggio Ape TM 703,...

Bearing. Outer size: 22mm, Depth: 12mm.

Flywheel retaining ring. For the Piaggio Ape 50 and Vespa 50. M12

Nut for securing the primary gear in the clutch housing. With connection for the oil pump.

6.6x1.8mm NB! Can also be used for the clutch lever of the older TL1M and...

12mm 8mm

Oil plug. Both the filler plug and the drain plug of the gearbox. Don't forget to order the...

Primary gear for all models Piaggio Ape 50. The gear is 16 teeth instead of the original 14 teeth...

The mounting plate for the gear cables at the gear shift arm. For all Piaggio Ape 50 models.

Complete clutch cover with gaskets, lever, push pin and bearings. High quality, Made in Italy.

Manifold for the Dell'Orto SHB carburettor. With this manifold kit, the rotating intake disc can...

Primary gear for all models Piaggio Ape 50.

Primary gear for all models Piaggio Ape 50. The gear is 16 teeth instead of the original 14 teeth...

Number 9. 25mm, 006425

Gearbox number 5. Rear axle number 21. Crankshaft number 8. 006647

20x24x9 mm