Crankshaft and parts

Numbers 7 on the parts drawing. Bearing dimensions 25x62x14mm. On the...

Numbers 7 (MP CAR) and 13 (TM) on the parts drawing. Bearing dimensions...

Length 145mm, hole piston side 23mm, shaft diameter 22.5mm.

31,8x20,4x1,5 mm

Complete set with crankshaft ball bearings and seals. Roller bearing MB2256 (28x45x17mm) and Ball...

Number 9 on the parts drawing. Oil seal size 32x62mm. On the clutch side. For models up to 1982...

Number 9 (MP CAR), 11 (TM) on the parts drawing. Oil seal size 34x62mm. On the clutch side. For...

Number 13 on the parts drawing. Oil seal size 32x52mm. On the flywheel side,...

Number 13 on the parts drawing. Oil seal size 32x45mm. On the flywheel side,...

Number 16 on the parts drawing. Oil seal size 24.9x45mm. On the side of the flywheel.

Number 16 (CAR MP) ,6 (TM) on the parts drawing. Oil seal size 24.9x40mm. On...

Number 15 on the parts drawing. Bearing dimensions 25x52mm. On the side of...

Number 15 (MP CAR), 5 (TM) on the parts drawing. Bearing dimensions 45mm. On...

Number 10 on the parts drawing. 9x3.7x3mm

Number 11 (MP-CAR / 9 (TM) on the parts drawing. 15.3 x 6.5 x 4mm

Needle bearing that connects the crankshaft rod to the piston. 16x20mm. Check if you have a 16 or...

Needle bearing that connects the crankshaft rod to the piston. 18x23mm. Check if you have a 16 or...

Located against the crankshaft. 32x66mm.

Numbers 8 (MP CAR) and 12 (TM) in the parts drawing. 006662 66x2mm

Number 14 in the parts drawing. 093804 52x1mm